Railclone - Windows Part 1

2 Panel Conditional

I am doing a three part series on building parametric windows using Railclone. This is the first installment which is starting off basic and is a slight adjustment of itoo's parameterising windows tutorial. You should watch this first as it explains how the Arithmetic/Selector node works. I will provide the expression anyway below if you don't require a thorough understanding Itoosoft Parameterise Windows Tutorial

Railclone - Parametric Facade Wall Builder

I came up with this Parametric Wall Builder as Im always building houses from CAD plans. It enabled me to be able to quickly build the walls and window, door & garage holes without needing to adjust the geometry by hand, it all works using splines. Its also helpful if a client comes back with changes to the Elevation as you can readjust the splines and the windows & walls readjust instantly.

You can adjust the Wall height, thickness & plaster size using user input parameters as well as the window capping thickness. You can view a short gif of how it works and for the full tutorial you can see the bottom of the page.